Intensity transformations are applied on images for contrast manipulation or image thresholding. These are in the spatial domain, i.e. they are performed directly on the pixels of the image at hand, as opposed to being performed on the Fourier transform of the image.
The following are commonly used intensity transformations:
- Image Negatives (Linear)
- Log Transformations
- Power-Law (Gamma) Transformations
- Piecewise-Linear Transformation Functions
Spatial Domain Processes –
Spatial domain processes can be described using the equation: ![g(x, y) = T[f(x, y)]](https://geeksforgeeks.org/wp-content/uploads/2023/10/quicklatex.com-02ae9f735d7fde31dafa2460b4c2da6d_l3.png "Rendered by QuickLaTeX.com")
where 
is the input image, T is an operator on f defined over a neighbourhood of the point (x, y), and 
is the output.
Image Negatives –
Image negatives are discussed in this article. Mathematically, assume that an image goes from intensity levels 0 to (L-1). Generally, L = 256. Then, the negative transformation can be described by the expression s = L-1-r where r is the initial intensity level and s is the final intensity level of a pixel. This produces a photographic negative.
Log Transformations –
Mathematically, log transformations can be expressed as s = clog(1+r). Here, s is the output intensity, r>=0 is the input intensity of the pixel, and c is a scaling constant. c is given by 255/(log (1 + m)), where m is the maximum pixel value in the image. It is done to ensure that the final pixel value does not exceed (L-1), or 255. Practically, log transformation maps a narrow range of low-intensity input values to a wide range of output values.
Consider the following input image.
Below is the code to apply log transformation to the image.
import cv2import numpy as np # Open the image.img = cv2.imread('sample.jpg') # Apply log transform.c = 255/(np.log(1 + np.max(img)))log_transformed = c * np.log(1 + img) # Specify the data type.log_transformed = np.array(log_transformed, dtype = np.uint8) # Save the output.cv2.imwrite('log_transformed.jpg', log_transformed) |
Below is the log-transformed output.
Power-Law (Gamma) Transformation –
Power-law (gamma) transformations can be mathematically expressed as 
. Gamma correction is important for displaying images on a screen correctly, to prevent bleaching or darkening of images when viewed from different types of monitors with different display settings. This is done because our eyes perceive images in a gamma-shaped curve, whereas cameras capture images in a linear fashion. Below is the Python code to apply gamma correction.
import cv2import numpy as np # Open the image.img = cv2.imread('sample.jpg') # Trying 4 gamma values.for gamma in [0.1, 0.5, 1.2, 2.2]: # Apply gamma correction. gamma_corrected = np.array(255*(img / 255) ** gamma, dtype = 'uint8') # Save edited images. cv2.imwrite('gamma_transformed'+str(gamma)+'.jpg', gamma_corrected) |
Below are the gamma-corrected outputs for different values of gamma.
Gamma = 0.1:
Gamma = 0.5:
Gamma = 1.2:
Gamma = 2.2:
As can be observed from the outputs as well as the graph, gamma>1 (indicated by the curve corresponding to ‘nth power’ label on the graph), the intensity of pixels decreases i.e. the image becomes darker. On the other hand, gamma<1 (indicated by the curve corresponding to ‘nth root’ label on the graph), the intensity increases i.e. the image becomes lighter.
Piecewise-Linear Transformation Functions –
These functions, as the name suggests, are not entirely linear in nature. However, they are linear between certain x-intervals. One of the most commonly used piecewise-linear transformation functions is contrast stretching.
Contrast can be defined as:
Contrast = (I_max - I_min)/(I_max + I_min)This process expands the range of intensity levels in an image so that it spans the full intensity of the camera/display. The figure below shows the graph corresponding to the contrast stretching.
With (r1, s1), (r2, s2) as parameters, the function stretches the intensity levels by essentially decreasing the intensity of the dark pixels and increasing the intensity of the light pixels. If r1 = s1 = 0 and r2 = s2 = L-1, the function becomes a straight dotted line in the graph (which gives no effect). The function is monotonically increasing so that the order of intensity levels between pixels is preserved.
Below is the Python code to perform contrast stretching.
import cv2import numpy as np # Function to map each intensity level to output intensity level.def pixelVal(pix, r1, s1, r2, s2): if (0 <= pix and pix <= r1): return (s1 / r1)*pix elif (r1 < pix and pix <= r2): return ((s2 - s1)/(r2 - r1)) * (pix - r1) + s1 else: return ((255 - s2)/(255 - r2)) * (pix - r2) + s2 # Open the image.img = cv2.imread('sample.jpg') # Define parameters.r1 = 70s1 = 0r2 = 140s2 = 255 # Vectorize the function to apply it to each value in the Numpy array.pixelVal_vec = np.vectorize(pixelVal) # Apply contrast stretching.contrast_stretched = pixelVal_vec(img, r1, s1, r2, s2) # Save edited image.cv2.imwrite('contrast_stretch.jpg', contrast_stretched) |
Output:
Please Login to comment…